Time Zone; Time Server - Nortel 1210 User Manual

o Now select Config, followed by Phone softkey.
o Press Tones, followed by Route softkey option.
o Choose whether to enable or disable the routing tone by pressing On
or Off.
o Further confirm your selection by pressing Yes or No.

Time Zone

Use the following procedure to set your time zone:
o Press the Services key and select Setup softkey.
o Select Time softkey, followed by the Tzone option.
o Use Up/Down navigation keys to scroll through the various time zones
and select the desired zone by pressing Set.
NOTE: By default your time zone is set to GMT London.

Time Server

Use the following procedure to either enter manually configure network time
servers, or allow the phone to use default time servers available on the Internet:
• Manual
You may choose to configure your preferred time servers by entering valid
time server addresses, such that your phone retrieves its time settings
from those servers. The procedure is as follows:
o Press the Services key and select Setup softkey.
o Select Time softkey, followed by Server option.
o Select Manual softkey and enter address of Time Server 1 (primary).
Press Enter to continue.
o Enter address of Time server 2 (optional) and press Enter to save.
Press Enter without entering a time server address if you wish not to
use Time server 2.
IP Phone 1200 SIP User Guide
25