Nortel 1535 User Manual page 42

Video calls
1. In the idle state, press
2. Dial the number of the contact to call.
3. To complete the call, perform one of the following:
— Press
— Press
— Wait 5 seconds to automatically end the call.
Attention: The called party accepts the call as either a video or an
audio call. If the called party accepts your call as audio only, you do
not see any remote video, nor do you begin sending your local video.
After the audio call starts, start sending local video by pressing Video
start. You do not receive the remote video until the called party also
presses Video start.
To place a direct video call from the Phonebook, perform the following
steps.
1. From the idle screen, press PHONEBOOK.
2. Select List.
3. Press OK.
4. Use the up and down arrows to highlight the contact you want to call.
5. Press OPTIONS,
6. Select Video
7. Press OK.
The IP Phone 1535 places the call to the selected contact.
To request a video conversation during an active voice call, perform the
following steps.
1. During an active voice call, press
The IP Phone 1535 sends a request to the called party. Your
telephone displays the message "Your video call request is being
processed."
2. If the called party accepts the request, the video conversation is
established.
42
Video start.
Send.
or press Video
call.
Video start.
start.
Video start.