Remote Start & Trunk Release; Remote Engine Starting; Remote Engine Starting – Lcd Pager-Remote - CrimeStopper SP-402 Operating Instructions Manual

REMO
REMOTE START & Trunk Release – Button Press Selection (Option # 8)
To eliminate the possibility of accidentally opening the trunk or starting the vehicle, there are (3) options for
button press selection. This option will allow you to change whether the Remote starter and Trunk release
activate by a:
4. Double button press.
5. Single ½ second press.
6. Press and Hold 2 seconds.
*Default = Single ½ second press and release*

REMOTE ENGINE STARTING

1) Press remote start button on the remote transmitter. System will chirp 3 times for audible confirmation.
(Chirps can be programmed on or off-See installation manual.)
2) Parking lights flash once, then turn on solid, Ignition/Accessory circuits turn on.
3) After a few seconds, Starter Motor engages, Parking lights and Accessory circuits turn off while cranking.
4) Engine Starts and Runs. Parking Lights and Accessory turn back on, Doors Lock.
5) Engine will remain running for programmed run time until reset with Brake pedal. If needed, the engine can
be turned off with remote transmitter.
FLASH 1X
PRESS START
REMOTE ENGINE STARTING – LCD PAGER-REMOTE:
When requesting a remote start the LCD pager remote will confirm with an Ignition Icon along with 3 beeps.
Once the vehicle has successfully started the remote will confirm back with 3 beeps and vibration, a Key Icon
and smoke coming from car. The LCD screen will display the remaining engine run time every minute.
REMOTE ENGINE CONTROL
IGN
THEN
SOLID
TE ENGINE CONTROL
AFTER
3
STARTER
SEC.
8
SOLID