Prior Intrusion Alert; Dome Light Illumination; Emergency Override; Valet Mode - CrimeStopper SP-402 Operating Instructions Manual

PRIOR INTRUSION ALERT

This system will notify you if the alarm was triggered while you were away. Upon disarming, there will be four
additional siren chirps after the two normal disarm chirps. Check your vehicle for any signs of a break in or
tampering. Also, see LED Diagnostics (page 17) to determine the cause of the trigger.
DOME LIGHT ILLUMINATION (Optional)
This feature will turn on the vehicle's dome light upon disarming for 30 seconds or until the key is inserted and
turned on. This will provide illuminated entry to your vehicle in dimly lit areas for safety and security.
EMERGENCY OVERRIDE (Disarm)
If you have lost the transmitter or it stops working for any reason and the Alarm is armed, you will have to
disarm the system manually. Open the door with the key [alarm will sound], turn the ignition on, and press the
override/program button for about 5 seconds. The Alarm will disarm and allow you to use the vehicle until you
can repair/replace the remote. Valet Mode also prevents Passive Arming.
VALET MODE (Solid Blue LED)
Disables alarm system and remote engine starting for vehicle servicing. The alarm system must be disarmed
to enter Valet Mode.
1. To Activate Valet Mode Manually: Turn the ignition on and press the Valet / override button [about 5-6
seconds] until you hear (3) siren chirps and the LED turns on solid. Repeat the process to exit VALET
mode.
2. To Activate Valet Mode with the Remote: Press and hold both the Lock and Unlock Button
together for about 3 seconds until 3 chirps are heard.
transmitter. Lock / Unlock and AUX features will still operate in VALET Mode however; Remote Start
and Alarm functions are inhibited.
OPERATING INSTRUCTIONS - ALARM
Repeat this step to exit via the remote
7