Low Battery Warning - Lcd Remote / Setting Clock - Lcd Remote - CrimeStopper CS-2014.DPII.FM.TW2 Operation Instructions Manual

2-way fm/fm lcd paging alarm & remote engine starting system
Table of Contents

Advertisement

Your 2-Way pager remote will warn you when the battery gets low. You will
see a battery icon on the LCD screen when it is time to replace the AAA
battery.
To replace the battery:
the back of the 2-Way LCD remote. Carefully insert a new battery, using the
outline on the bottom of the battery compartment as a guide. Your remote will
beep 3 times when the battery is inserted correctly.
1. Press button #5 (Recall) on the side of the remote control 5 times.
2. The remote will beep and the AM or PM display will begin flashing.
3. Press button #3 (Trunk) to go to the next item – AM - PM - Hour- Minutes.
4. Press button #1 (Lock) to increase time.
5. Press button #2 (Unlock) to decrease time.
6. Press button #4 (Start) to Disable or Enable Beep.
7. Press button #5 (Recall) to Exit Setup or wait 7 seconds, the LCD light will turn off.
LOW BATTERY WARNING - LCD REMOTE
simply unlatch and slide open the battery door on
SETTING THE CLOCK (2-WAY- LCD REMOTE)
19
LOW BATTERY

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superpage vCs-2014dp-tw2fm/fm

Table of Contents