Manual Transmission Mode - CrimeStopper SP-402 Operating Instructions Manual

Combo alarm & remote engine starting system
Hide thumbs Also See for SP-402:
Table of Contents

Advertisement

MANUAL TRANSMISSION EXIT PROCEDURE (Option #15-1, 15-3 and 15-4)
This system features a Manual Transmission Mode. When exiting the vehicle, there is safety check out
procedure required for the manual transmission mode to work. There are 3 choices of operation,
1. Option 15-1: With engine running and vehicle in neutral, set parking brake, then press "KEY" Icon on
transmitter. The remote starter will turn on and take over operation of the vehicle.
2. Option 15-3: With engine running and vehicle in neutral, set parking brake, the remote starter will turn
on and take over operation of the vehicle.
a. Remove key, exit vehicle (remote starter unit must "SEE" door opened, then closed with engine
running).
b. Press Lock button within 10 seconds of closing door to "Arm with Idle Down" (engine stays
running). Press Lock a 2
Transmission Mode.
c. Press Lock button after 10 seconds to Arm system, lock the doors and shut down the engine.
From this point, you can will remote start the engine unless a door is opened.
d. Press the Remote Start Button after closing door to set up Manual Transmission Mode without
Arming Alarm System.
3. Option 15-4: With engine running and vehicle in neutral, set parking brake, the remote starter will turn
on and take over operation of the vehicle. Remove Key and exit vehicle. When the last door of vehicle is
closed, the engine will turn off in 2 seconds and set up Manual Transmission Mode. You can arm the
alarm system to lock doors and protect vehicle.
NOTE: Passive arming does not work in Manual Transmission Mode. This system can be programmed to lock
the doors when remote start aborts (engine turns off).
TURBO TIMER in Manual Transmission Mode:
For Turbo Timer, press brake pedal before setting parking brake or pressing the Remote Start Icon (requires
Turbo Timer Option # 31). After exiting vehicle, press lock button to set Manual Transmission Mode. The
engine will remain running for the Turbo Time setting (1, 3 or 5 minutes). Turbo Timer does not work with
option 15-4 selected.

MANUAL TRANSMISSION MODE

nd
time to cancel "Idle Down" (engine turns off) and set up Manual
13

Advertisement

Table of Contents
loading

Table of Contents