Vehicle Operation - CrimeStopper SP-402 Operating Instructions Manual

2 VEHICLE CONTROL
A single Remote Control can control two different vehicles.
To set up the 2-Vehicle operation you must first program your remotes to Vehicle #2. Follow the "Transmitter
Programming" steps (Pg. 12) at the second vehicle and learn YOUR remote, along with vehicle #2's existing
remotes.
VEH 1 = Blue LED
VEH 2 = Red LED
To change from vehicle 1 to vehicle 2, press the VEH button on remote for about 2 seconds. The LED on
remote will change from Blue to Red. The VEH button can be used to keep remote control from accidentally
operating your vehicle.
Note: Use can use Vehicle 2 Mode to turn off remote if there is no system installed in a 2

2 VEHICLE OPERATION

VEH
17
nd
vehicle