2-Vehicle Operation - CrimeStopper CS-2011DP Installation Handbook

Alarm combo system dp series ii (2-way data port)
Hide thumbs Also See for CS-2011DP:
Table of Contents

Advertisement

The CS-2011DP, CS-2012DP-TW1, CS-2014DP-TW2-FM and CS-2900DP-FM systems can be used for 2 car
operation. A single remote can control two independent vehicles with identical systems installed, for example, two
2011's or two 2900's.
NOTE: These systems ARE NOT interchangeable. A CS-2011DP system remote CANNOT control a CS-
2012DP-TW1, CS-2014DP-TW2-FM or CS-2900DP-FM system and vice versa!
See diagram below on how to switch your remote(s) to vehicle #2 operation. To set up the 2-Vehicle operation you
must first program your remotes to Vehicle #2. Follow the "Transmitter Programming" steps at the second vehicle
and learn YOUR remote, along with vehicle #2's existing remotes.
INFINITY
TM
Press 3 times to control
Press & hold 2 seconds to
vehicle #2. See owner's
control vehicle #2.
manual for operation.

2-VEHICLE OPERATION

VEHICLE #2 CONTROL:
CS-2012DP-TW1
Press & hold side button
for 5 seconds, Remote will
beep twice then you have
15 seconds to control
vehicle #2.
27
CS-2014DP-TW1
Press & hold side button
for 2 seconds to change
vehicles. A numeral 1 or 2
will appear in upper right
corner of LCD screen.
CS-2011DP &
"Sidekick"
CrimeStopper
Press & hold 2 seconds to
control vehicle #2.

Advertisement

Table of Contents
loading

Table of Contents