Table of Contents
Advertisement
2 VEHICLE CONTROL
Your CS-2014DP-FM remotes have the ability to control a second vehicle with a Crimestopper CS-2014DP-
FM system installed.
To set up the 2-Vehicle operation you
must first program your remotes to
Vehicle #2.
Follow the "Transmitter
Programming" steps (Pg. 14) at the
second vehicle and learn YOUR remote,
along with vehicle #2's existing remotes.
2-VEHCLE OPERATION NOTES:
(1) You do not have to switch between
Vehicle I and II to get pages from each
vehicle. Your remote pager will receive
pages from both cars regardless of which
vehicle the pager is set to. The "1" or "2"
icon will always display with each page
indicate which vehicle the page originated
from.
(2) When programming CS-2014DP-FM
systems, all remote/pagers and sidekick
remotes for that vehicle must be learned
at the time of programming. When you
program your remote at the second
vehicle, that vehicle's original remote
must also be programmed. Your remote
should be set in Vehicle "2" and the
vehicle's original remote should be set in
Vehicle "1".
2 VEHICLE OPERATION
VEHICLE #2 CONTROL:
"Sidekick"
Remote
START
CRIMESTOPPER
Press & hold button #5 for
2 seconds or until the LED
flashes , then you have 3
seconds to control vehicle #2.
16
LED
Flashes
Press & hold side button
for 2 seconds. The remote
will beep and "2" icon will
appear on LCD screen.
FIXED
ANTENNA
Advertisement
Table of Contents
