Vehicle Operation - CrimeStopper CoolStart RS-1604TW1 Operating Instructions Manual

A single remote can control two different vehicles CoolStart
systems installed. However, both systems must be the same
type. RS-1604TW1/1704TW2 is not compatible with RS-
1804FM/ 1905FM.
Programming:
You must first Programming your remote for
nd
2

vehicle operation:

nd
(2 Vehicle Programming and Operation instruction):
1 Way sidekick remote
In step #4 of transmitter programming (see page 15) press side
button first, then you have 3 seconds to press lock and unlock
at the same time, parking light will flash indicating the remote is
programming.
Operation:
Press the vehicle #2 side button on your remote first and within
3 seconds press any of the 4 function buttons on your remote.
You can keep pressing function buttons to control car #2 as long
as it is within the 3-second window.
elapsed, the remote will revert back to Car #1 operation.
1 Way 5 button sidekick remote
In step #4 of transmitter programming (see page 15) press and
hold middle button #5 for 2 sec., then press lock and unlock at
the same time, parking light will flash indicating the remote is
programming.
Operation:
Press vehicle #2 button (middle button) for 2 sec. and within 3
seconds press any of the 4 function buttons on your remote.
You can keep pressing function buttons to control car #2 as long
as it is within the 3-second window.
elapsed, the remote will revert back to Car #1 operation.
2-VEHICLE OPERATION
After 3 seconds have
After 3 seconds have
16
1 WAY SIDEKICK REMOTE
VEHICLE #2
Press side button
first, then you have
3 seconds to
COOLSTART
control vehicle #2.
VEHICLE 2
Press Middle
Button first,
START
Then you have
COOL START
3 seconds to
Control vehicle #2