Installation
Installation
Follow the steps below for quick and easy installation of your scanner and scanner drivers.
System requirements
•
PC or supported workstation. Recommended requirements: Core 2 processor, 2 GB RAM, 5 GB of available hard drive space, USB 2.0 interface.
•
Compatible Windows operating system – View the ws/readme.htm file on the WIDEsystem TOOLS CD-ROM.
•
Enabled USB port on your PC.
•
The WIDEsystem TOOLS CD supplied with your scanner.
•
Scanning software and/or compatible third party software.
•
Grounded power outlet.
•
PC with USB port or enabled Gigabit port.
NOTE: Gigabit interface compatibility and speeds depend on your scanner model.
Installation step by step
1
Set up the scan station
Your scanner should be placed either on the specially designed stand-alone floor stand
or on a sturdy table. Make sure there is enough space behind the scanner to allow the
media to run out.
See the section on Software Applications for Scanning »
IMPORTANT: DO NOT YET CONNECT THE SCANNER TO
POWER OR PC.
See also the Safety Instructions at the end of this operator's
guide
6