Installation; System Requirements; Installation Step By Step - Contex SD One 36 User Manual

Installation

Installation
Follow the steps below for quick and easy installation of your scanner and scanner drivers.

System requirements

• PC or supported workstation. Recommended requirements: 1.6GHz Dual Core processor or better, 2 GB RAM, 5 GB of available hard drive space, USB 2.0
interface.
• Compatible Windows operating system – View the ws/readme.htm file on the WIDEsystem TOOLS USB.
• Enabled USB port on your PC.
• The WIDEsystem TOOLS USB supplied with your scanner.
• Scanning software and/or compatible third party software.
• Grounded power outlet.

Installation step by step

Setting up the scan station
1
Set up the scanner station
Your scanner should be placed either on the specially designed stand-alone floor
stand or on a sturdy table. Make sure there is enough space behind the scanner
to allow the media to run out.
See the section on Software Applications for Scanning.
IMPORTANT: DO NOT YET CONNECT THE SCANNER TO
POWER OR PC.
See also the Safety Instructions at the end of this operator's guide
7