Adjust The Screen Timeouts; Clean Screen; Routine Care - Honeywell Tuxedo Touch User Manual

Wifi home automation system
Hide thumbs Also See for Tuxedo Touch:
Table of Contents

Advertisement

Adjust the Screen Timeouts

When the keypad is left idle, it automatically:
• turns the "Backlight Off After" the selected backlight off time has expired (unless "Never" option is selected).
• returns to the "Home" screen after the selected "To Homepage After" time has expired (unless "Never" option is selected), and
• if enabled, the "Auto Slideshow After" time begins the slide show.
To select the desired screen timeouts, do the following:
ICON
1. From the "Home" screen, press the Setup
icon.
2. Press the Disp & Audio Setup icon.
3. Enter your "Authorized Code", if required.
4. Press the desired selection from the drop-
down list displaying the time period for
each option.
Yes saves the change.
No discards the change.

Clean Screen

With the exception of normal cleaning, the keypad is maintenance free. Clean the touch-screen as follows:
ICON
1. From the "Home" screen, press the Setup
icon.
2. Press the Disp & Audio Setup icon.
3. Enter your "Authorized Code", if required.
4. Press the CLEAN SCREEN icon to disable
the keypad for 30 seconds so you can wipe
the screen clean.
5. Press Continue to disable the touch-screen.
6. Press Cancel to exit.
IMPORTANT: Do not use an abrasive cleaning agent or abrasive cloth when cleaning the touch-screen or damage to the touch-
screen may occur.

Routine Care

Treat the components of your security system as you would any other electrical equipment. Do not slam sensor-protected
doors or windows.
Keep dust from accumulating on the keypad and all protective sensors, particularly on motion sensors and smoke detectors.
The keypad case and sensors should be carefully dusted with a dry soft cloth. Do not spray water or any other fluid on
the units.
Setup (cont'd)
ACTION
Settings include:
Note 1: The "To Homepage After" option is only available if the Screen
Blackout (EN50131 Display) option is not enabled by the installer.
Note 2: When in EN50131 mode, "Auto Slideshow After" is preset to "1"
minute and can not be changed.
ACTION
NOTES
If changes are made, when you exit a pop-up window displays:
"Information
Settings saved"
• Backlight Off After X time
• Return To Homepage After X time
• Auto Slideshow After X time.
NOTES
At the "Touch Screen Disabled for =30 Seconds" screen, the touch-
screen should be wiped clean of fingerprints using a mild soap solution and a
soft cloth. When the counter reaches zero, the window automatically closes
and the touch-screen is active.
NOTE: The Emergency screen cannot be accessed while running in the
clean screen mode.
A pop-up window displays
"Touch Screen will be disabled so that
you may wipe the screen clean. Please use a damp, soft cloth. DO NOT
use any liquids, sprays, or ammonia-based cleaners. Press CONTINUE
to disable touchscreen."
**Panics cannot be initiated during this process**
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents