Programming - Ericsson BUSINESSPHONE 250 User Manual

PROGRAMMING

GENERAL
PROGRAMMING
prog
15 Sep 10:35
PHONE PROGRAMMING
key
change
forward
enter
store
(continued)
BusinessPhone 250 - Executive Telephone
BusinessPhone 50 - Executive Telephone
If you require frequent use of certain functions, you may program
them on the keys A-N on the telephone and A-Q on the
key-panel. When you want to use the function, just press the key.
How to program a function on key A.
Press (see display)
+15°
short-no.
key
Press (see display)
Press the desired programmable key
Press (see display)
Select function code (see display)
See section "Function codes and required data".
Press (see display)
Enter associated number
See section "Function codes and required data".
Press (see display)
Continue with section "select ringing character"
or
Press to finish programming
After approximately 10 seconds, the function key is active
Note: The dual-function keys allow programmed functions and short
numbers to be combined on the same keys. Remove the transparent
cover in order to write the name beside the key. Put the name referring
to the programmed function in the field above the line to indicate that
it is the primary function. If a function is already programmed on the
key, this will be displayed when you start programming.
diversion ringing
PROGRAMMING
71