Recognition) - Chevrolet 2013 TRAX Owner's Manual

in a different mode, then the
device transmits the order to
stop. Depending on the cell
phone s options, this order to
play/stop may take time to
activate.
If the Bluetooth music playback
is not functioning, then check to
see if the cell phone is in the
waiting screen mode.
Sounds may be cut off during
the Bluetooth music playback.
The infotainment system outputs
the audio from the cell phone or
Bluetooth device as it is
transmitted.
Bluetooth (Voice

Recognition)

Using Voice Recognition
To use voice recognition, press the
g
/ button located on the steering
wheel. Use the commands below for
the various voice features.
For additional information, say
"Help" while you are in a voice
recognition menu.
Pairing
A Bluetooth-enabled cell phone
must be paired to the Bluetooth
system and then connected to the
vehicle before it can be used. See
your cell phone manufacturer's user
guide for Bluetooth functions before
pairing the cell phone. If a Bluetooth
phone is not connected, calls will be
made using OnStar Hands-Free
Calling, if available. See OnStar
Overview on page 14 1.
Pairing Information
A Bluetooth phone with MP3
capability can be paired to the
vehicle as a phone and an MP3
player at the same time.
Up to five cell phones can be
paired to the Bluetooth system.
The pairing process is disabled
when the vehicle is moving.
Infotainment System
Pairing only needs to be
completed once, unless the
pairing information on the cell
phone changes or the cell phone
is deleted from the system.
Only one paired cell phone can
be connected to the Bluetooth
system at a time.
If multiple paired cell phones are
within range of the system, the
system connects to the first
available paired cell phone in the
order that they were first paired
to the system. To link to a
different paired phone, see
Connecting to a Different
Phone later in this section.
Pairing a Phone
g
1. Press / . The system
responds Ready, followed by
a tone.
2. Say Bluetooth. This command
can be skipped.
7-39