Chevrolet 2013 TRAX Owner's Manual page 328

10-64 Vehicle Care
4. Place the jack at the position
marked with a half circle.
5. Place the hex tube end of the
wrench over the hex head of the
jack to attach it.
6. Turn the wheel wrench
clockwise until the lift head is
firmly contacting the proper
lifting point nearest the flat tire.
WARNING
Getting under a vehicle when it is
lifted on a jack is dangerous.
If the vehicle slips off the jack,
you could be badly injured or
killed. Never get under a vehicle
when it is supported only by
a jack.
WARNING
Raising the vehicle with the jack
improperly positioned can
damage the vehicle and even
make the vehicle fall. To help
WARNING (Continued)
avoid personal injury and vehicle
damage, be sure to fit the jack lift
head into the proper location
before raising the vehicle.
Lifting a vehicle and getting under
it to do maintenance or repairs is
dangerous without the
appropriate safety equipment and
training. If a jack is provided with
the vehicle, it is designed only for
changing a flat tire. If it is used for
anything else, you or others could
be badly injured or killed if the
vehicle slips off the jack. If a jack
is provided with the vehicle, only
use it for changing a flat tire.
(Continued)
WARNING