Headlamp High/Low-Beam; Flash-To-Pass; Daytime Running; Lamps (Drl) - Chevrolet 2013 TRAX Owner's Manual

6-2 Lighting
5
(Headlamps): Turns the
headlamps on together with the
lamps listed below. A warning chime
sounds if the driver door is opened
when the ignition switch is off and
the headlamps are on.
Parking Lamps
Taillamps
License Plate Lamps
Instrument Panel Lights
Sidemarker Lamps
(Front Fog Lamps): For
vehicles with fog lamps, press to
turn the lamps on or off.
See Front Fog Lamps on page 6 4.
When the lights are on,
lit. See Lamps On Reminder on
page 5 23.
Headlamp High/
Low-Beam Changer
3

(Headlamp High/Low-Beam

Changer): Push the turn signal
lever away from you and release, to
turn the high beams on.
To return to low beams, push the
lever again or pull it toward you and
release.
This indicator light turns on in the
;
instrument cluster when the
will be
high-beam headlamps are on.

Flash-to-Pass

To flash the high beams, pull the
turn signal lever all the way toward
you. Then release it.

Daytime Running

Lamps (DRL)

Daytime Running Lamps can make
it easier for others to see the front of
your vehicle during the day. Fully
functional daytime running lamps
are required on all vehicles first sold
in Canada.
A light sensor on top of the
instrument panel makes the DRL
work, so be sure it is not covered.