Bluetooth Audio; Onstar ® System - Chevrolet 2013 TRAX Owner's Manual

7-26 Infotainment System
clock/temp display: To
display the clock and
temperature on the full
screen, select On or Off.
display settings: Adjust the
brightness and contrast of
the screen.
4
3. Press .

Bluetooth Audio

Streaming Audio
If equipped, music may be played
from a paired Bluetooth. See
Bluetooth (Overview) on page 7 28
or Bluetooth (Infotainment Controls)
on page 7 30 or Bluetooth (Voice
Recognition) on page 7 39 for help
pairing a device.
The music can be controlled by
controls on the device.
To play music via Bluetooth:
1. Power on the device, pair, and
connect the device. The device
will displayed GM Audio
Source.
2. Once paired, press CD/AUX to
select Bluetooth Audio.
3. Press the play button on the
device to begin playback.
When selecting Bluetooth audio, the
radio may not be able to launch the
audio player on the connected
device to start playing. When the
vehicle is not moving, choose the
phone to begin playback.
All devices launch audio differently.
When selecting Bluetooth audio as
a source, the radio may show as
paused on the screen. Press play
on the device to begin playback.
Some phones support sending
Bluetooth music information to
display on the radio. When the radio
receives this information, it will
check to see if any album art is
available and display it. For more
information about your phone and
supported Bluetooth features, see
www.gm.com/bluetooth.
Navigation
®
OnStar System
If equipped, this vehicle has a
comprehensive, in-vehicle system
that can connect to a live Advisor
for Emergency, Security, Navigation,
Connection, and Diagnostic
Services.
For safety, some features are
disabled while the vehicle is in
motion.
Control Panel Overview
OnStar Light
The OnStar system status light is
next to the OnStar buttons. If the
status light is:
Solid Green: System is ready.
Flashing Green: On a call.
Red: Indicates a problem.