Chevrolet 2013 TRAX Owner's Manual page 269

2. Go to the front of the vehicle and
move the secondary hood
release lever toward the right
side of the vehicle.
3. Lift the hood and release the
hood prop from its retainer,
above the radiator. Securely
place the hood prop into the slot
on the underside of the hood.
Vehicle Care
To close the hood:
1. Before closing the hood, be sure
all filler caps are on properly.
Then, lift the hood to relieve
pressure on the hood prop.
Remove the hood prop from the
slot in the underside of the hood
and return the prop to its
retainer. The prop rod must click
into place when returning it to
the retainer to prevent hood
damage.
2. Lower the hood 30 cm (12 in)
above the vehicle and release it
so it fully latches. Check to
make sure the hood is closed
and repeat the process if
necessary.
10-5