Windshield Wiper/Washer - Chevrolet 2013 TRAX Owner's Manual

Table of Contents

Advertisement

Windshield Wiper/Washer

The windshield wiper/washer lever
is on the right side of the steering
column.
Move the lever to one of the
following positions:
HI: Use for fast wipes.
LO: Use for slow wipes.
INT (Intermittent Wipes): Move
the lever up to INT for intermittent
wipes, then turn the
up for more frequent wipes or down
for less frequent wipes.
OFF: Use to turn the wipers off.
(Mist): For a single wipe, briefly
move the wiper lever down. For
several wipes, hold the wiper
lever down.
(Windshield Washer): Pull the
windshield wiper lever toward you to
spray windshield washer fluid and
activate the wipers. The wipers will
continue until the lever is released
or the maximum wash time is
reached. When the windshield wiper
lever is released, additional wipes
may occur depending on how long
the windshield washer had been
activated. See Washer Fluid on
page 10 21 for information on filling
the windshield washer fluid
reservoir.
Instruments and Controls
INT band
In freezing weather, do not use
the washer until the windshield is
warmed. Otherwise the washer
fluid can form ice on the
windshield, blocking your vision.
Clear snow and ice from the wiper
blades before using them. If frozen
to the windshield, carefully loosen or
thaw them. Damaged wiper blades
should be replaced. See Wiper
Blade Replacement on page 10 26.
Heavy snow or ice can overload the
wiper motor. A circuit breaker will
stop the motor until it cools down.
5-3
WARNING

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents