STORAGE TANK AND GAS BOOSTER ASSEMBLY
GAS BOOSTER BRACKETS
It is necessary to remove, reposition and refit the top and bottom mounting brackets of the gas booster so it
can be mounted onto the storage tank.
Remove the screws securing the top bracket at the rear of the gas booster, rotate the bracket through
180° and refit the screws in the same locating holes.
Remove the screws securing the bottom bracket at the rear of the gas booster, reposition the bracket
across to the right of the gas booster (as viewed from the rear face) and refit the screws in the locating
holes.
ROTATE
BRACKET
180°
REMOVE
SCREWS
REFIT
SCREWS
CONTINUOUS FLOW GAS WATER HEATER (27L)
repositioning top mounting bracket
TOP BRACKET REPOSITIONING
REMOVE
SCREWS
MOVE ACROSS
REFIT
SCREWS
CONTINUOUS FLOW GAS WATER HEATER (27L)
repositioning bottom mounting bracket
BOTTOM BRACKET REPOSITIONING
34