Recall - BT Freelance XC 500 User Manual

Freelance XC 500 ~ 1st Edition ~ 6th March '03 ~ 5165

Recall

To use the recall button
This is used when
connected to certain
switchboards and for
some BT Calling Features
or those services available
via your network provider.
To set the dialling mode
Press the
enter the menu.
Use the DOWN button to
scroll to SETUP and press
the button.
Use the DOWN button to
scroll to DIALMODE and press
the button.
Use the UP or DOWN
button to select either TONE
or PULSE.
Press the
You will hear a confirmation
beep.
button to
button.
To automatically insert
a pause after an access
code
With some switchboards
it may be helpful to dial a
pause after entering the
switchboard access code,
e.g. 9, 11 etc. to enable
you to get an outside line.
This feature automatically
inserts a pause between
the access code and the
telephone number that
you have entered in the
Phonebook. However, for
this feature to work you
must still enter the access
code at the front of the
telephone number when
storing in the Phonebook.
Press the
enter the menu.
Use the DOWN button to
scroll to SETUP.
Press the
Use the DOWN button to
scroll to PABX.
Press the
Use the DOWN button to
scroll to PBX 1.
Press the
Display shows PIN?.
button to
button.
button.
button.
60