BT Freelance XC 500 User Manual page 16

Freelance XC 500 ~ 1st Edition ~ 6th March '03 ~ 5165
Connect the telephone
7
line cord to the base
Plug the telephone line
cord into the line socket
on your base and connect
the other end to the
telephone line socket on
your wall.
8 To set the day and time
The message counter on
the base unit will flash
between 0 and C until the
day and time are set.
The day and time
must be set using the
Freelance XC 500
handset.
Your Freelance XC 500
automatically adds the day
and time to all messages
and memos received.
When you first switch the
power on, the clock is set
to Sunday, 12.01pm.
15
You can change the day
and time as required.
Press the button twice
on the Freelance XC 500
handset.
Note
The main menu
announcements are
automatically announced
through the handset
earpiece when the
button is pressed twice.
Press the 0 button.
The prompt will announce,
"To set day and time press
✱
, to hear day and time
#
press ".
(Please note that if you
#
press the button this
allows you to check the
day and time.)
✱
Press the button.
The prompt will announce,
"Please enter new day and
time after the tone".
After the tone enter the
day, followed by the time
using the 24 hour clock.
1 = Sun, 2 = Mon,
3 = Tues, 4 = Wed,
5 = Thur, 6 = Fri, 7 = Sat.