Access Code And Entering A Pause; Recall - BT CALYPSO 120 User Manual

6329 Calypso 120 UG

Access code and entering a pause

If you are connecting your BT Calypso 120 to a switchboard/PBX you may need to prefix
stored numbers with an access code (e.g. 9) in order to get an outside line. So that the
switchboard has time to pick up an outside line, you may also need to add a Pause after
the access code.
PABX access code
1. Press Menu
2. Scroll to
3. Display shows
4. Enter your PABX access code and press Save.
5. Scroll to
6. Press and hold
Entering a pause
A pause is entered when storing a number in the phonebook (see page 23) or PABX access
code by pressing and holding the

Recall

The (Recall) button is used when connected to certain switchboards (PBXs) and with
some BT Calling Features, or equivalent services available via your Network Provider.
All manuals and user guides at all-guides.com
4/10/04 4:25 pm
BT Calypso 120 – Edition 04 – 04.10.04 – 6329
then scroll to Handeset
PABX access code and press OK.
Set Code . Press OK.
and press OK.
ON
Back to return to standby.
Page 67
and press OK.
button until the display shows
General information
.
P
67