Recall Mode/Dialling Mode - BT DIVERSE X10 User Manual

5737 Diverse X10 UG [Iss2-1]
80 Technical information
All manuals and user guides at all-guides.com
5/3/04 10:34 am
BT Diverse X10 – Issue 2 – Edition 02 – 29.10.03 – 5737
Changing the recall mode
The
certain switchboards, e.g. to transfer calls, and for some
BT Calling Features or those services available via your
network provider.
1. Press Menu, then press
displayed. Press OK.
2. Press
Timed Break
3. Press
or Earth
4. Press
Changing the dialling mode
Your BT Diverse X10 is set to tone dialling. If required
you can switch it to pulse dialling.
1. Press Menu, then press
displayed. Press OK.
2. Press
Tone Dial
3. Press
Tone Dial
4. Press
Page 80
(Recall) button is used when connected to
until
until Recall Mode is displayed, then press OK.
is displayed.
to select the required recall mode:
. Press Save.
to return to the idle display.
until
until Dial Mode is displayed, then press OK.
is displayed.
to select the required dialling mode:
or Pulse Dial . Press Save.
to return to the idle display.
Base Settings is
Timed Break
Base Settings is