BT Freelance XC 500 User Manual page 17

Freelance XC 500 ~ 1st Edition ~ 6th March '03 ~ 5165
For example:
1 1415 = Sunday 2.15pm.
Or
5 0915 = Thursday
9.15am.
You will then hear your
setting confirmed.
Press the DEL button
twice to return the
handset to standby.
Note
If you have any difficulties
setting up your Freelance XC
500 please call the Helpline on
08706 058 047.
Note
If the day and time is entered
incorrectly, the prompt will
announce, "Incorrect, please set
again". Enter the correct setting
within 15 seconds otherwise the
handset will return to standby
mode. If the day and time is
entered incorrectly three times
the handset will return to standby.
Please see the table below for your
Freelance XC 500 default settings.
Freelance XC 500 Default
Settings Table
Feature
Day/Time Stamp
Answer Delay
Audible Message
Alert Tone
Outgoing Message Answer and Record "Hello
Answer Mode
Base ringer level
Base loudspeaker
volume
PIN code
Dialling mode
If you wish to personalise your
answering machine settings, for
example record your own outgoing
message etc, please see "Setting up
and personalising your answering
machine" beginning on page 32.
The Freelance XC 500 answering
machine will now be switched ON
and set to its default settings and is
now ready for use.
Default Setting
Sunday 12:01 pm
Your answering machine
will answer after 6 rings
OFF
your call cannot be taken at
the moment so please leave
your message after the tone. "
ON
High
Level 5
0000
Tone
16