Using Additional Handsets And Bases - BT Freelance XC 500 User Manual

Freelance XC 500 ~ 1st Edition ~ 6th March '03 ~ 5165
Using additional handsets
and bases
Up to 5 handsets can be
registered and operated from any
one Freelance XC 500 base. This
allows you to make internal calls
between two handsets while a
third is making an external call.
Each handset can be registered
on up to 4 bases.
Each additional handset you
purchase must be registered with
the base. (If you have purchased
the Twin, this will already be
pre-registered.)
Your handset supplied is
pre-registered as Handset 1 to its
base (Base 1).
Note
Remember to charge batteries
of new handsets for at least 16
hours before use.
If the display shows NOT REG and
the symbol is flashing, your
handset is not yet registered with
the base.
To register a handset to
another base
At the base:
Press and hold the base
PAGE button for at least
10 seconds, until you hear
the validation tone (two
beeps), then release the
button.
At the handset:
Press the
enter the menu.
Use the DOWN button
to scroll to REGISTER and
press the
button to
button.
52