Help - BT Freelance XC 500 User Manual

Freelance XC 500 ~ 1st Edition ~ 6th March '03 ~ 5165

Help

Replacing the handset batteries
After a time, you may find that the
handset batteries run out of charge
more quickly. This is a standard
sign of wear and the batteries will
need replacing. See page XX.
No display appears
The batteries may be flat or dead.
Recharge or replace the batteries.
The handset may be switched off.
No dial tone
Is the telephone line cord plugged
into the phone socket?
Check that:
• The base station is connected to
the mains power and switched on.
You cannot link up with the
base station
Is the display flashing
Check that:
• The mains power cable is
connected at the base and
switched on.
• You are in range of the base
station.
• The batteries are not low or flat.
• You are connected to the correct
base if you are using more than
one base station. See page 27.
No ring on the handset
The ringer volume may be switched
to off. To adjust the ringer volume
on the handset. See page 23.
Check that:
• The base station is plugged into
the phone socket.
• The base station is plugged into
the mains power and switched on.
Buzzing noise on my radio, TV,
computer or hearing aid
Sometimes, your Freelance XC
500 can interfere with other
electrical equipment if it is placed
too close.
It is recommended that you place
?
your Freelance XC 500 at least one
metre away from such appliances
to avoid any risk of interference.
56