Space Belt - Oki PACEMARK 4410 Service Manual

3.3.26 Space Belt

(1) Remove Cover Assy Access / Cover Assy Side (R) / Cover Assy Side (L) /Cover Assy Front
/ Frame Assy Rear / Plate Front (stuck). (See 3.3.1)
(2) Remove Space Motor. (See 3.3.15)
(3) Remove Printing Head. (See 3.3.18)
(4) Remove Idle Pulley 1 from Idle Pulley Bracket, then remove Space Belt 2.
(5) Unscrew 5 screw and pull out Connector Guide 3, unscrew the screw 4 and remove Space
Belt 2.
(6) For installation, reverse the removal procedure.
3
1
5
4
2
5
Carriage frame
Assembly drawing
4
Hook the nail on
79