Oki PACEMARK 4410 Service Manual page 92

Item No. Items
7 Auto Gap Motor Assy
Backlash
8 Bail Gear Assy Backlash
Standard Value
J=0.1mm
Mounting Screws
Idle Gear
Adjusting Cam
K=0.2mm
Mounting Screws
Bail Gear Assy
Drive Gear B
Idle Gear A
Illustration
1Verify the backlash is 0.1 mm bet-
ween the idle gear and the adjusting
Change Motor
cam.
2If adjustment is required, screw down
the 2 screws fixing the auto gap assy,
and ensure the backlash between the
idle gear and the adjusting cam.
Mounting Screws
1Verify the backlash is 0.2 mm bet-
ween the idle gear A and the drive gear
B, and between the idle gear B and the
idle gear C.
2If adjustment is required, screw down
Mounting Screws
the 2 screws fixing the bail gear assy,
and ensure the back lash between the
idle gear A and the drive gear B, and
between the idle gear B and the idle
Idle Gear B
gear C.
Idle Gear C
91
Adjustment Method