Printer Unit - Oki PACEMARK 4410 Service Manual

3.3.2

Printer Unit

(1) Remove Cover Assy Access / Cover Assy Side (R) / Cover Assy Side (L) /Cover Assy Front
/ Frame Assy Rear / Plate Front (stuck). (See 3.3.1)
(2) Unscrew 4 screws 2 which fix Printer Unit 1.
(3) Unplug I/F Connecting Cable 4 and Head Cable 5 from Control Board 3.
(4) Unplug the connector to Power Supply Assy 6 and unscrew 2 screws 8, then remove FG
Wires 9.
(5) Unplug Junction Board Cord 0 from Junction Board (PRA Printed Board)(CN1).
(6) Unplug SP Slit Sensor Cord A.
(7) With the handle B held, lift and remove Printer Unit 1.
(Note on Installation)
1. When lowering Printer Unit, prevent connection cords/cables from being caught under the unit.
(Lifting and lowering Printer Unit require 2 or more maintenance personnel.)
B
4
9
2
1
5
3
2
8
B
9
CN1
6
A
0
55