Head Cooling Fan 2 - Oki PACEMARK 4410 Service Manual

3.3.14 Head Cooling Fan 2

(1) Remove Cover Assy Access / Cover Assy Side (R) / Cover Assy Side (L) /Cover Assy Front
/ Frame Assy Rear / Plate Front (stuck). (See 3.3.1)
(2) Unscrew the screw 1 and remove Cable Holder Cover 2.
(3) Unplug the connector 3 from I/F Board (PHA Printed Board)(CN6) 6.
(4) Release the cords from the cord clamps on the cord route.
(5) Unscrew 2 screws 4 and remove Head Cleaning Fan 2 5.
(6) For installation, reverse the removal procedure.
(Note on Installation)
1. The fan should be installed, matching the direction of air flow to the direction of arrow shown
in the figure.
Air Flow
4
2
3
5
4
1
6
67