Oki PACEMARK 4410 Service Manual page 138

6 After Carriage works, Alarm Lamp goes on and "ERROR (in the upper row), BAIL (in the lower)" is
displayed on LCD.
• Bail operates during initialization?
Yes No
• The cables to PHA-Board CN2 and CN1 connected properly?
Yes
• The cable to PHA-Board CN6 connected properly?
Yes
• No failure at the gear between the Bail Motor bails?
No
• Replace Bail Motor. Recovered?
No
• Replace PMA-Board. Recovered?
No
• Replace the junction cable. Recovered?
No
• Replace PHA-Board.
• The cables to PHA-Board CN1 and CN3 connected properly?
No
• Connect the cables properly.
No
• Connect the cable properly.
Yes
• Replace the damaged gear. If the Bail Motor gear is broken, replace the
whole Bail Motor.
Yes
• End
Yes
• End
Yes
• End
137