Receiving Problems - Canon FAX-TR177 User Manual

❏ Cannot send using Error Correction Mode (ECM).
• If the receiving party's fax machine does not support ECM, then the document is sent in
normal mode without error checking.
• Make sure ECM is on (see <ECM TX>, p. 7-3).
❏ Errors occur frequently while sending.
• Lower the transmission speed (see <TX START SPEED>, p. 7-4).

Receiving problems

❏ Cannot receive a document automatically.
• For the fax to receive documents automatically, the receive mode must be set to <FAX
ONLY MODE>, <FAX/TEL MODE> (Fax/Tel Auto SW), or <ANS.MACHINE MODE>
(see Chapter 6) must be set. If you have set <ANS.MACHINE MODE>, check that an
answering machine is connected to the fax and that it is turned on with an outgoing message
properly recorded (see p. 6-3).
• When <REC'D IN MEMORY> appears on the LCD, press [Stop] to print documents stored
in memory.
• Cancel delayed sending (see p. 5-8) or delete any documents stored in memory
(see p. 5-10).
• Check the LCD for an error message (see p. 8-13).
• Print an activity report and check for an error (see p. 7-5).
• Make sure paper is loaded in the paper tray (see p. 1-8).
• Make sure all line connections are secure (see pp. 1-2, 1-3).
8-8