Table of Contents
Advertisement
Registering coded speed
dialing numbers and names
Use coded speed dialing to dial a fax number at the press of three buttons. A fax/telephone
number can be registered under each two-digit speed dialing code. You can also register the
name of the party; the name appears on the printout of the coded speed dialing list.
1
Press [Function].
2
Use [ ] or [ ] to select <TEL REGISTRATION>, then press [Start/Copy].
Use [ ] or [ ] to select <CODED SPEED DIAL>, then press [Start/Copy].
3
01=
4
Use [ ] or [ ] to select the two-digit code (01-30) under which you want to register the
number.
If a number is already registered under this coded speed dialing code, the number is displayed on the
LCD*.
5
Enter the party's number and name the same way you registered them for one-touch
speed dialing.
See steps 4 to 5, Registering one-touch speed dialing numbers and names, p. 2-7.
6
To assign additional coded speed dialing numbers, start from step 4.
To finish, press [Stop].
* To delete the name and number registered under the coded speed dialing code, press [Clear] and [Start/
Copy] after you perform steps 1 to 4 above.
2-8
Advertisement
Table of Contents
