The Server Has No Power Or A Power Fault - Avaya S8730 Installing

Server installation

The server has no power or a power fault

The server does not power on.
The system power, external health, or internal health LEDs indicate power faults.
Internal health LED is red or amber
1. Identify any component identified by a health LED.
2. Reseat the component and check it for loose connections.
3. If the condition still exists, you may need to replace the component. For more
System Power LED is off
1. Make sure power cords are plugged into the back of the server and into a
2. Make sure the UPS is plugged into a nonswitched outlet.
3. Make sure the outlet has power.
4. Push the power button on the front of the server.
5. Reseat the power supply.
6. If the condition still exists, you may need to replace the power supply. For more
System Power LED is Amber or Green
If the external health LED is red or amber complete the following steps. If the external health
LED is not red or amber than proceed as you would if the system power LED was off.
1. If the server has a single power supply, and the external health LED is red, replace
2. Press the Power-On Standby button.
32 Installing the Avaya S8730 Server for Modular Messaging
information, see Maintaining the Avaya S8730 Server.
nonswitched outlet or UPS.
information, see Maintaining the Avaya S8730 Server.
the power supply. For more information, see Maintaining the Avaya S8730 Server. If
not, continue with the next step.
January 2009