Getting Started
Phone Feature Descriptions
The following sections describe default configurations. Your phone may be programmed
differently. Contact your system administrator for more information. See "5312 IP Phone
Features" on
Handset
The handset provided with this equipment is hearing aid compatible (HAC). If you are using a
headset or if you are in Handsfree Mode, you do not need to use the handset. See "Headset
Instructions" on
Display
The display provides a two-line, 20-character viewing area for using features and identifying
callers. When idle, the display shows user information and the time and date.
Display Buttons
The 5324 IP Phone (only) has three Display buttons under the Display. In some features, the
left and right Display buttons provide back (<<) and forward (>>) navigation. The center Display
button always displays user and system information. See "Viewing Your System Information" on
page 31
Ring/Message Indicator
The Ring/Message Indicator flashes or stays lit to indicate call, message, and feature activity.
For more information about messaging features, see "Messages" on
Indicator signals are described in the following table.
Speaker
The speaker provides audio for handsfree calls and background music. See "Using Handsfree
Mode" on
on
Page 4
page 2
and "5324 IP Phone Features" on
page 7
and "Using Handsfree Mode" on
for more information.
Indicator Signals
Rapidly flashing
Slowly flashing
On
Off
page 29
for information about handsfree calls. See "Listening to Background Music"
page 12
for more information about background music.
The 5312 IP Phone uses half-duplex audio when using the speakerphone (both
NOTE
parties cannot talk at the same time).
page 3
page 29
Description
You have an incoming call.
You have a waiting message or callback message.
You are on a call or using a feature.
Your phone is idle.
Mitel
®
5312/5324 IP Phone User Guide– Issue 1, September 2009
for phone feature locations.
for more information.
page
41. Ring/Message