Touch Screen - Crestron TPMC-4XG Operation Manual

Isys i/O™ Handheld WiFi Touchpanel
14 • Isys i/O™ Handheld WiFi Touchpanel: TPMC-4XG
NOTE: The battery cover must be on the TPMC-4XG in order for the unit to
function.
NOTE: The battery strength meter in the system bar at the top of the setup screen
will show full strength when the TPMC-4XG is on its dock and charging.
Setup Functions
The setup functions control the basic operation of the TPMC-4XG.
Disable System Messages
Touching Disable System Messages allows you to disable pop-up messages that
warn of communication failure between the TPMC-4XG and the WAP or the control
system.

Touch Screen

Touch the Touch Screen button to display the "Stylus Properties" window, which
allows you to set stylus properties and perform screen calibration.
Use the supplied stylus and follow the instructions to customize the unit's sensitivity
to your use of the stylus.
NOTE: The double-tap function is not supported at this time.
"Stylus Properties" Window (Double-Tap Tab)
Crestron TPMC-4XG
Operations Guide – DOC. 6655B