Crestron TPMC-4XG Operation Manual page 22

Isys i/O™ Handheld WiFi Touchpanel
18 • Isys i/O™ Handheld WiFi Touchpanel: TPMC-4XG
Touch Connect to establish communication with the selected access point. The box
next to the Scan button will show the signal strength. The IP Addr, Subnet and
Gateway boxes will show the settings.
"WiFi Configuration" Window (Shown After Connection)
If you have not yet configured your wireless access point, touch Config to display
the "WiFi Config" window with its General tab and 802. 1x tab.
The General tab allows you to select the authentication mode, encryption mode,
enter the WEP Key and WEP Key Index and see the WPA/WPA2 PSK Key.
"WiFi Config" Window (General Tab)
Crestron TPMC-4XG
Operations Guide – DOC. 6655B