Table of Contents
Advertisement
When you have set your Interval
Training Set on, you will have one
extra display. You can only change the
lower row for this display. See the
alternative phase displays from
"Exercising with Interval Training Set"
section.
You can configure the middle and upper rows either in the Measure
mode or during the exercise.
Select the middle row information
1. Press the down button to select the desired display alternative. When
you swap the middle row information, the upper and lower rows change
also. Continue selecting the upper and lower rows.
Select the upper row information
2. Press the up button to select from the following:
Time of day (Time), stopwatch (Sw), lap time (Lp),
or if you have turned the functions on select from:
calorie expenditure (Cal), trip (Trip), current speed (Spd), average speed
(Avg speed), maximum speed (Max speed), cadence* (Cad), altitude
(Alt), ascended metres (Asc), output power* (Pwr), left right pedalling
balance* (LRB), pedalling index* (PI).
You cannot select the same displayed function to the upper and middle row
i. e. the option on the middle row is no longer available for the upper row.
C 53
Phase Name
Countdown
timer
Advertisement
Table of Contents
