Clavia Nord Lead 2X User Manual page 69

NORD LEAD 2X V1.0x
• For the Program and Control parameters, the 'on' setting means that the respective MIDI data is
transmitted and received by the Nord Lead 2X, while the 'oF' setting means that it is not.
• For the Arpeggio parameter, the 'A.on' setting means that generated arpeggios can be sent out as MIDI
notes. This makes it possible to arpeggiate chords on connected synthesizers and sound modules, and
to record arpeggios in a sequencer. With the 'A.oF' setting, the actual chord you play on the keyboard
is sent to MIDI Out, regardless of whether the Nord Lead 2X arpeggio is activated or not.
Be sure to turn the Arpeggio MIDI Out feature off if you are using Nord Lead 2X in Local Off mode
and/or in a "Thru-loop" with a sequencer, other MIDI instruments etc! Under such conditions, the
Arpeggio MIDI Out feature will either prevent the instrument from sounding at all, or cause a MIDI
feedback loop.
MIDI C MIDI C MIDI C MIDI C
H H H H A A A A N N N N N N N N E E E E L L L L
S S S S MIDI C MIDI C MIDI C MIDI C
L L L L O O O O T T T T
To set the MIDI Channel that a certain Slot receives and transmits on, proceed as follows:
1. Hold down S
2. The D
ISPLAY
3. Select the Slot you want to make settings for. The Slot's LED flashes.
4. Use the U /D
P
send MIDI, set it to 'oFF'.
For more information on Slots and MIDI Channels, see
G G G G MIDI C MIDI C MIDI C MIDI C
L L L L O O O O B B B B A A A A L L L L
This is the MIDI Channel used for transmitting and receiving Program Change messages for switching
between Performances. To set the Global MIDI Channel, proceed as follows:
1. Hold down S
2. Press "MIDI C
3. Use the U /D
P
Note that the Global MIDI Channel should NOT be set to the same as any of the Slot's MIDI
Channels to avoid conflicts.
For more information on the Global MIDI Channel, see
S S S S
P P P P E E E E C C C C I I I I A A A A L L L L
There are five special functions that make it possible to use MIDI for functions that have previously been
reserved for users of analog modular synthesizer systems.
H H H H A A A A N N N N N N N N E E E E L L L L
and press "MIDI C
HIFT
shows the MIDI Channel for the active Slot.
buttons to set the MIDI Channel. If you don't want the slot to respond to or
OWN
H H H H A A A A N N N N N N N N E E E E L L L L
and press "MIDI C
HIFT
" again. The D
H ISPLAY
button to set the Global MIDI Channel.
OWN
".
H
page 76.
".
H
now shows the Global MIDI Channel.
page 76.
9. Shift functions: MIDI Channel
Page 67