Clavia Nord Lead 2X User Manual page 110

13. MIDI implementation: System Exclusive implementation
Byte (Hex)
$00 to $03 or
$00-$6C
$F7
• If Message Type = 10 (Edit Buffer), the Message Specification can be $00 to $03, corresponding to
Patch Slot buttons A to D.
• If Message Type = 11 to 14, then the Message Specification (00 to 98) corresponds to the Program
Number within the Bank (01 to 99).
P P P P
E E E E R R R R F F F F O O O O R R R R M M M M A A A A N N N N C C C C E E E E
This message contains the actual Performance. One complete message contains the data for one Perform-
ance.
This message is transmitted from the Nord Lead 2X in one of two cases:
• When a Performance Dump is initiated from the front panel.
• When a valid Performance Request message has been received.
This message should be sent to the Nord Lead 2X when you want to replace a Performance currently in
the instrument, with a new one. The Message Type and Message Specification then specify in which
memory location the Performance should be stored.
Byte (Hex)
$F0
$33
<Device ID>
$04
$1E or $1F-$22
$00 or $00-$63
<Perf. Data 1>
<Perf. Data 2>
<Perf. Data 3>
:
<Perf. Data 708>
$F7
Page 108
Byte (Decimal)
0 to 3 or 0 to 108
247
D D D D
U U U U M M M M P P P P
Byte (Decimal)
240
51
4
30 or 31-34
0 or 0 to 99
247
Description
Message Specification specifies the exact memory location, see
below.
End Of Exclusive
Description
System Exclusive
Manufacturer ID (clavia)
= Global MIDI Channel. 0 to 15 ($0-$F).
Model ID for Nord Lead 2X
Message Type specifies Performance Edit Buffer (30) or
Performance Bank 1-4 (31-34)
Message Specification specifies the Performance number,
see below.
See page 112.
End Of Exclusive
NORD LEAD 2X V1.0x