Clavia Nord Lead 2X User Manual page 22

3. Basic operation: Using a control (expression) pedal
3. If you want the connected pedal to duplicate the functionality of the M
the D button until the D
OWN
With this setting, the expression pedal will have the same function as the M
4. If you instead want to select an independent control function for the pedal, press the S
The D
ISPLAY
5. Use the U /D
P
Display shows:
6. After you have made your choice, press S
7. Use the U /D
P
right in the D
difference between the pedal's "full up" and "full down" states. High values give a greater difference
between the pedal's up and down states.
8. If needed, repeat steps 5 to 10 to set pedal control function for the other slots.
9. Press S to exit the Special menu and return to play mode.
HIFT
Nord Lead 2X will also recognize Expression pedal messages via MIDI as MIDI Controller #11.
Page 20
ISPLAY
will flash, showing one of the abbreviations in the table below.
buttons to select one of the following control functions:
OWN
Pedal assigned to:
LFO 1 Amount.
LFO 2 Amount.
Filter Cutoff Frequency.
FM Amount.
Oscillator 2 Pitch.
buttons to select a control amount value ('1' to '7'). This value (shown to the
OWN
) determines the range of the pedal control signal. Lower values give a smaller
ISPLAY
reads 'E.oF').
again. You will return to the 'E' display.
TORE
NORD LEAD 2X V1.0x
W , press
ODULATION HEEL
W
ODULATION HEEL
button.
TORE
.