Clavia Nord Lead 2X User Manual page 109

NORD LEAD 2X V1.0x
This message should be sent to the Nord Lead 2X when you want to replace a Percussion Kit currently
in the instrument, with a new one. When it comes to the location of the received Percussion Kit Dumps,
the same rules apply as when receiving regular Program Dumps.
Byte (Hex)
$F0
$33
<Device ID>
$04
$00 to $04
$10 to $13 or $63-$6C
<Patch Data 1>
<Patch Data 2>
<Patch Data 3>
:
<Patch Data 1056>
$F7
• If Message Type = 0 (Edit Buffer), the Message Specification can be 16 to 19, corresponding to Patch
Slot buttons A to D.
• If Message Type = 1 to 4, then the Message Specification (99 to 108) corresponds to the Percussion
Kit locations (P0 to P9) of the selected Bank.
P P P P D D D D
A A A A T T T T C C C C H H H H U U U U M M M M P P P P
This message is used for requesting the Nord Lead 2X to transmit one Patch or Percussion Kit Dump
Message. The Message Type and Message Specification are used to specify which Patch should be trans-
mitted.
This message is never transmitted from the Nord Lead 2X.
Byte (Hex)
$F0
$33
<Device ID>
$04
$A to $E
13. MIDI implementation: System Exclusive implementation
Byte (Decimal)
240
51
4
0 to 4
16 to 19 or 99 to 108
247
R R R R
E E E E Q Q Q Q U U U U E E E E S S S S T T T T
Byte (Decimal)
240
51
4
10 to 14
Description
System Exclusive
Manufacturer ID (clavia)
= Global MIDI Channel. 0 to 15 ($0-$F).
Model ID for Nord Lead 2X
Message Type specifies the Bank. 0=Edit Buffer, 1 to
4=Bank 1 to 4
Message Specification specifies the exact memory loca-
tion, see below.
Patch data for eight percussion sounds. See
End Of Exclusive
Description
System Exclusive
Manufacturer ID (clavia)
= Global MIDI Channel. 0 to 15 ($0-$F).
Model ID for Nord Lead 2X
Message Type specifies the Bank. $A=Edit Buffer, $B to
$E=Bank 1 to 4
page 111.
Page 107