Assigning A Code To A Call; Dtmf-Postdialling; Loudspeaking Function - Avaya 3720 User Manual

Assigning a code to a call

A code can be assigned to each outgoing and incoming external call. This enables the call to be
assigned to a project or client number.
Note:
The code must be enabled by your system administrator. The length of the code
Note:
is set in the telephone system.
During a call.
1. Press Soft key More.
2. Select Code.
If already set up, the current code number is displayed.
3. Enter the code.
The new code number is saved automatically.

DTMF-postdialling

You can switch over to DTMF-postdialling whilst telephoning. Each press of a button is then
transmitted as a tone, allowing you to e.g. operate an answering machine.
Activating DTMF
During a call.
1. Press Soft key More.
2. Select DTMF.
Continue to dial. Each digit is transmitted as a tone.
Note:
By default, DTMF postdialling is active and does not need to be switched on.
Note:
Sending "A" - "D" as a DTMF signal
During a call.
1. Press Soft key More.
2. Select the appropriate entry, e.g. Tone dial (A).
"A" will be sent as a tone.

Loudspeaking Function

During a call the loudspeaking function can be activated.
1. Press Soft key R for a long period.
42
Avaya 3720 DECT Telephone connected to Integral 5 - User Guide 05/2009