Avaya 3720 User Manual page 50

Call subscriber whose call diversion is to be changed
1. Call the number of your telephone system from an external telephone, e.g. 0697505.
2. Enter the number of the remote control access, e.g. 24.
3. A dialling tone sounds as confirmation.
4. Enter the internal call number of the subscriber whose call diversion you wish to change.
5. Enter the 4- or 6-digit PIN-number of the subscriber, e.g. 1234.
A dialling tone sounds as confirmation.
6. Now continue with one of the following three variations (a - c):
a) Diverting calls to another telephone or mailbox (call divert to, twinning)
1. Press the * key, followed by 71.
2. Enter the dial code for the call diversion option, e.g. 1.
Dial codes for call routing variations:
- 1 = immediately -- 2 = on no answer -- 3 = on busy -- 4 = twinning
3. Enter the internal or external number to which calls are to be diverted, e.g. 00897543.
4. Press the # key.
You will hear an acknowledgement tone.
b) Divert calls from an internal subscriber (Call diversion from, Follow me)
1. Press the * key, followed by 70.
2. Enter the code for the call diversion variation, e.g. 1.
Codes for call diversion variations:
- 1 = immediately -- 2 = delayed -- 3 = if busy
3. Enter the 2-4 digit internal call number of the subscriber from which the calls are to be
diverted.
You will hear an acknowledgement tone.
c) Deactivate call diversion/twinning
1. Press the # key followed by
- 70 for "Call diversion from" or
- 71 for "Call diversion to".
You will hear an acknowledgement tone. Call diversion is switched off.
50
Avaya 3720 DECT Telephone connected to Integral 5 - User Guide 05/2009