Transfer To New Call; Starting A Conference Call; Ending A Conference Call; Callback - Avaya 3720 User Manual

1. Press the On-Hook key.
Both call partners are connected to each other.

Transfer to new Call

You are in a call.
1. Press Soft key R.
The caller is put on hold.
2. Dial the number of the person you want to transfer the call to.
Tell the subscriber you want to transfer a call.
Note:
Press On-hook key to transfer the call.External-external call transfer must be
Note:
enabled by your system administrator.
Note:
You can pass on the caller directly, without waiting for her/him to pick up. If the
Note:
internal subscriber does not take the call, the call will come back to you after a
short period.
Note:
With an external-external call transfer two trunk lines are occupied!
Note:

Starting a Conference Call

A new call is started during conversation, the first call is on hold.
1. Select Soft key More.
2. Select Conference.
You can now speak with both participants at the same time.

Ending a Conference Call

You have initiated the active conference call.
1. Press the On-Hook key.
With an all-internal conference, the other two conference participants remain connected.

Callback

The subscriber you are calling is busy. When you activate callback, you receive a signal when
the busy subscriber is once again free.
40
Avaya 3720 DECT Telephone connected to Integral 5 - User Guide 05/2009