Table of Contents
Advertisement
CDM-600L Satellite Modem
Front Panel Operation
6.3.3
INFORMATION
INFO: ALL ID FORMAT TX RX CLOCKS
DROP
Select information to view using the [←][→] arrow keys, then press ENTER.
Note: INFO screens display information on the current configuration of the modem
without risking inadvertent changes.
6.3.3.1
INFO:ALL
This menu permits the user to view the configuration of the unit, in a step-by-step process
by scrolling through each menu in succession. Press ENTER to continue through all the
configurations.
Note that the user may only view the configurations – no editing is possible.
Press CLEAR to discontinue.
6.3.3.2
INFO: ID
----A TEST MESSAGE TO SHOW CIRCUIT ID---
This displays the user-defined Circuit ID string (40 characters), which is entered via the
UTILITY, ID screen. To return to the previous menu, press ENTER.
6.3.3.3
INFO: MODE
INFO:
An example of a Mode Information screen is shown above.
INSERT
REMOTE
ALL = START
(STOP, START)
MODEM CIRCUIT ID:
MODE:
TX = RS422 :NONE
RX = RS422 :NONE
ALARM-MASK
6–30
MN/CDM600L.IOM
EDMAC
MISC
Revision 2
Advertisement
Table of Contents
