Table of Contents
Advertisement
CDM-600L Satellite Modem
Remote Control
Command
Arguments
(Instruction
for Command
Parameter
Type
Code and
or Response
Qualifier)
BUC Phase
N/A
1 byte, value
Lock Loop
of 0 or 1
BUC Software
N/A
2 bytes
Version
BUC Power
N/A
2 bytes
Class
Description of Arguments
to Query
Query only.
BUC phase lock loop:
0=Locked
1=Unlocked
Note: This query is only valid when the FSK and BUC power are
turned On.
Query only.
BUC software version, where xx is between 0 and 15.
Note: This query is only valid when the FSK and BUC power are
turned On.
Query only.
BUC Power class, where xx indicates the power class in watts.
Example: OPC=25
Note: This query is only valid when the FSK and BUC power are
enabled.
Response to
Command
N/A
N/A
N/A
16–38
Revision 2
MN/CDM600L.IOM
Query
(Instruction
Response to Query
Code and
Qualifier)
OLL?
OLL=x
(see description of
arguments)
OSV?
OSV=xx
(see description of
arguments)
OPC?
OPC=xx
(see description of
arguments)
Advertisement
Table of Contents
