Staple Cartridge Replacement And Staple Jam Removal - Sharp LASER PRINTER Operation Manual

FINISHER

Staple cartridge replacement and staple jam removal

When the staple cartridge is empty or staples become jammed, a message will appear in the message display of the
operation panel.
Follow the procedure below to replace the staple cartridge or remove jammed staples.
Open the front cover.
1
Turn the staple unit to face up.
2
Hold the release lever to remove the staple
3
box.
Remove the empty staple cartridge.
4
Insert a new staple cartridge into the
5
staple box aligning the arrow of the staple
cartridge with that of the staple box.
5-12
Check the remaining
staples in the staple box.
If no staple remains,
replace the staple
cartridge (steps 4 to 9).
If sufficient staples
remain, remove the
jammed staples (steps
10 to 14).
NOTES
G
Do not remove the fixing tape before inserting
the staple cartridge.
G
Ensure that the staples are securely fixed. Push
the cartridge until it clicks in place.
Remove the tape that fixes the staples by
6
pulling it straight.
Insert the staple box.
7
Unlock the staple unit lever and return the
8
staple unit to face down.
Close the front cover.
9
NOTE
Execute test printing in the staple sort mode to
ensure that stapling is performed properly.
Staple cartridge replacement is now complete.
Following steps 10 to 14 are the procedure for
staple jam removal. These steps are not needed
for staple cartridge replacement.
Push the staple box until
it clicks into place.